2 SafeCom Go Ricoh
D60703-16 46
Types H, K and O:
1. Open a web browser and enter the printer‘s address.
Use of JavaScript (Active Scripting) must be enabled.
2. Click Login and enter Login User Name (admin) and Login Password (by
default there is no password) and then click Login.
3. Click Configuration on the left menu.
4. Under Extended Feature Settings click Install.
5. Select Local File and click Browse… to locate the Ricoh type specific
subfolders, /ricoh_deploy_files_type_h and select the
080xxx_servlet.zip file. Click Open.
6. Click Display Extended Feature List.
7. In Install to select SD Card Slot 1, where 1 is the slot with the VM Card.
8. In Auto Start click On.
9. On the Extended Feature List click RicohServlet.
10. Click Install.
11. On the Confirm web page click OK.
12. Restart the printer.
To Next Page
Loading...
