3. Copier/Document Server Features
This chapter describes user tools in the Copier / Document Server Features menu. For details on how to
access Copier / Document Server Features, see "Accessing User Tools".
General Features
This section describes the user tools in the General Features menu under Copier / Document Server
Features.
Default settings are shown in bold type.
Auto Image Density Priority
You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or
modes are cleared.
The default setting for "Photo" is Off.
The default setting for "Non-photo" is On.
Original Photo Type Priority
When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of
the selected original type.
The default setting is Printed Photo.
Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.
Paper Display
You can choose to have the available paper trays and sizes shown on the initial display.
The default setting is Display.
If you select [Hide], the display is shown as below. Press [Auto Paper Select] to display paper sizes.
103
To Next Page
Loading...
Need help?
General
