Printing the Configuration Page
This section describes how to print the Configuration Page.
1. Press [Printer Features].
2. Press [Configuration Page] on the [List / Test Print].
The configuration page is printed.
3. Press the [User Tools/Counter] key.
Interpreting the configuration page
This section describes the Configuration Page.
System Reference
• Unit Number
Displays the serial number assigned to the board by its manufacturer.
• Total Memory
Displays the total amount of memory (SDRAM) installed on the printer.
• Firmware Version
• Printer: Displays the version number of the printer firmware.
• System: Displays the version number of the system firmware.
• Engine: Displays the version number of the printer engine.
• LCDC: Displays the version number of the panel display.
• NIB: Displays the version number of the Network interface.
• Device Connection
This item(s) appears when the device option(s) is installed.
• HDD: Font / Macro Download
Displays the capacity of the hard disk drive.
5. Printer Features
200
To Next Page
Loading...
Need help?
General
