When you wish to use the gateways regardless of the IP-Fax destination numbers, register
only the gateway addresses without registering the prefix.
8. Select a protocol.
9. Press [Change] for "Gateway Address".
10. Enter the gateway address, and then press [OK].
11. Press [OK].
12. Press the [User Tools/Counter] key.
• Delete:
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Program / Change / Delete Gateway].
4. Press [Delete], and then select a gateway to delete.
5. Press [Yes] on the confirmation message.
If you do not want to delete the gateway you have selected, press [No].
6. Press [Exit].
7. Press the [User Tools/Counter] key.
E-mail Setting
Set whether or not to use "E-mail" in the fax functions.
The default setting is Off.
Folder Setting
Set whether or not to use "Folder" in the fax functions.
The default setting is Off.
• p.12 "Accessing User Tools"
• p.151 "Registering Fax Information"
• p.159 "Parameter Settings"
Initial Settings
141
To Next Page
Loading...
Need help?
General
