8. To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].
You can select a size from [Auto Detect], [Regular Size], or [Custom Size].
If you select [Auto Detect], proceed to steps 9 and 14.
If you select [Regular Size], proceed to steps 9, 10 and 14.
If you select [Custom Size], proceed to steps 9 and 11 to 14.
9. Select the size you want to program.
If you select [Regular Size], select a paper size displayed, and then proceed to step 14.
If you select [Custom Size], proceed to step 11.
10. Select the size you want to program from the sizes shown.
11. Make sure that [Vertical] is selected.
12. Enter the vertical size of the paper using the number keys, and then press the [ ] key.
4. Facsimile Features
180
To Next Page
Loading...
Need help?
General
