Under Windows 2000/XP or Windows Server 2003/2003 R2, follow the procedure below to disable
form feed according to the operating system used:
• Clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog box.
Banner Page
Do not use NetWare to configure a banner page.
Under Windows 2000/XP or Windows Server 2003/2003 R2, follow the procedure below to disable
banner pages according to the operating system used:
• Clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties dialog
box.
Printing after Resetting the Printer
Printer to print server connection requires 30 - 40 seconds to resume after the printer is reset. During this
period, jobs may be accepted (depending on NetWare specifications) but not printed.
To print after resetting the printer as the remote printer, check on the print server that the remote printer is
disconnected, or wait for two minutes before trying to print.
Using as a NetWare Print Server / Remote Printer
47
To Next Page
Loading...
