• Even after you turn off the machine, stored documents remain. However, the [Auto Delete Temporary
Print Jobs] or [Auto Delete Stored Print Jobs] settings are applied first.
• If the application has a collate option, make sure it is not selected before sending a print job. Locked
Print jobs are automatically collated by the printer driver as default. If a collate option is selected in
the application print dialog box, more sets than intended may be printed.
• After the Locked Print file is printed, the job is automatically deleted.
• For details about the error log on the control panel, see "Checking the Error Log".
• For details about the [Auto Delete Temporary Print Jobs] and [Auto Delete Stored Print Jobs], see
"Printer Features", General Settings Guide.
• p.98 "Checking the Error Log"
Printing a Locked Print File
The following procedure describes how to print a Locked Print file with the PCL 6/5e printer driver. For
details about how to print a Locked Print file with the PostScript 3 printer driver, see PostScript 3 Supplement
included as a PDF file on the CD-ROM.
• Applications with their own drivers, such as PageMaker, do not support this function.
• If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this function.
1. Configure the Locked Print in the printer driver's properties.
For details about configuring the printer drivers, see the corresponding Help files.
2. Click [OK] to close the printer driver's properties.
3. Start printing from the application's [Print] dialog box.
The Locked Print job is sent to the machine.
4. On the machine's control panel, press the [Printer] key to display the Printer screen.
5. Press [Print Jobs].
3. Other Print Operations
80
To Next Page
Loading...
