• If the orientation of originals is different from that of the copy paper, the machine will automatically
rotate the image by 90 degrees to make copies properly.
•
You cannot copy with originals different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page is copied blank.
• In Magazine mode, the copying may take some time after scanning originals.
• When the booklet finisher is installed, if you select Staple: Centre in Magazine mode, the machine
staples and folds the paper in the center, then delivers the paper folded.
• p.65 "Originals and Copy Orientation"
•
p.207 "Edit"
Covers
You can use this function to create cover sheets by adding additional pages of different paper, or
copying existing pages onto different paper.
• Before using this function, select the trays for covers under Cover Sheet Tray in Tray Paper Settings.
For details, see “System Settings”, Network and System Settings Reference.
•
You cannot specify the bypass tray as the Main Sheet Tray.
• When selecting [Copy], select whether the front and back covers are copied 1-sided or 2-sided.
The Covers function includes Front Cover and Front/Back Cover.
Front Cover
This function copies the first page of an original onto paper that has been specified for covers, or
places a cover sheet before the first copy page.
• Copy
• Blank
3. Advanced Copying
164
To Next Page
Loading...
