1. While "Copying..." is displayed, press the [Clear/Stop] key.
2. Press [Change Quantity].
3. Enter the number of copy sets with the number keys, and then press the [ ] key.
4. Press [Continue].
Copying starts again.
• The number of sets you can enter in step 3 differs depending on when the [Clear/Stop] key is
pressed.
Stack
Groups together copies of each page in a multi-page original.
If the internal shift tray or a finisher is attached, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
Finishing
79
To Next Page
Loading...
