You can adjust the position of the date stamp within the available ranges shown below.
(mainly Europe and Asia)
“Top Left” T/B: 4 144 mm, L/R: 4 144 mm
“Top Centre” T/B: 4 144 mm, L/R: 72 72 mm
“Top Right” T/B: 4 144 mm, L/R: 4 144 mm
“Bottom Left” T/B: 4 144 mm, L/R: 4 144 mm
“Bottom Centre” T/B: 4 144 mm, L/R: 72 72 mm
“Bottom Right” T/B: 4 144 mm, L/R: 4 144 mm
(mainly North America)
“Top Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Top Center” T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
“Top Right” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Bottom Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Bottom Center” T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
“Bottom Right” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
•
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]
Page Numbering
This section describes the user tools in the Page Numbering menu under Stamp.
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Default: [P1,P2...]
Font
You can select the font in Page Numbering mode.
Default: [Font 1]
Size
You can set the size of the stamp printed in Page Numbering mode.
Default: [Auto]
Duplex Back Page Stamping Position
You can set the position of the duplex back page number printed in Duplex mode.
Default: [Opposite Position]
5. Copier and Document Server Features
216
To Next Page
Loading...
