Tables
5.13.2 DOWNLOADING NVRAM DATA (SP5-825)
The following data are not downloaded from the SD card:
ï‚§ Total counter
ï‚§ C/O, P/O Counter
ï‚§ Duplex, A3/DLT/Over 420 mm, Staple and Scanner application scanning counters (system
settings).
ï‚§ Engine SP data
1. Turn off the main switch.
2. Remove the controller cover [A] ( x 2).
3. Plug the SD card into SD card slot 2 (Lower Slot) [A].
4. Turn on the main switch.
5. Execute SP5-825.
6. Press "1" to start downloading the NVRAM data.