Sample Copy
Screen settings will change and display “continue” or Suspend.
Use this option to check the copy settings before making a
long copy run.
Place originals
Select any other necessary functions for copy job
Enter number of desire copies
Instead of [START] press [Sample Copy] key
-One set is delivered as a sample
If Sample Copy is acceptable, press [Continue]
-The number of copies made is the number of copies
requested minus the proof copy.
If you press [Suspend] after checking the results, return
to step 1 to adjust the copy settings as necessary.
-Depending on the combination of functions, you may
not be able to change some settings.
You can press [Sample Copy] again or press [Start] to
output the job
Note: This feature can only be used when [sort] is
selected. This feature is not available from the
[Simplified screen].
To Next Page
Loading...
