What to do if the message "Following output tray is full. Remove paper." appears on my Ricoh All in One Printer?
To resume printing, remove paper from the output tray. If the paper is going to the finisher shift tray, press the [Stop] key to pause printing and then remove the paper to prevent it from falling. To continue printing, press [Continue] on the display panel.
What does “Please wait” mean on my Ricoh Aficio MP 6002?
This message appears on your Ricoh All in One Printer when you press the [Energy Saver] key, when the machine is warming up, or when you change the toner cartridge. Wait for a while. If the machine does not get ready in five minutes, contact your service representative. Also, wait until the message disappears and do not turn off the main power switch while the message is showing.
Why is the display off on my Ricoh All in One Printer and how to turn it on?
The Ricoh All in One Printer might be in Low Power mode. Touch the display panel or press a key on the control panel to exit Low Power mode. Alternatively, the printer could be in Sleep mode. Press the [Energy Saver] key or the [Check Status] key to exit Sleep mode.
Why does my Ricoh Aficio MP 6002 All in One Printer say "You do not have a privilege to use this function"?
The entered login user name or login password for your Ricoh All in One Printer is not correct. Check that the user name and password are correct.
Why does an error message remain on my Ricoh Aficio MP 6002 All in One Printer even after removing misfed paper?
An error message remains on your Ricoh All in One Printer, because when a misfeed message appears, it remains until you open and close the cover as required, or paper is still jammed in the tray. Remove misfed paper, and then open and close the cover.
Why does my Ricoh Aficio MP 6002 say "You do not have the privileges to use this function"?
The logged-in user name on your Ricoh All in One Printer does not have permission for the selected function.
What to do if an error has occurred on my Ricoh All in One Printer?
An error has occurred on your Ricoh All in One Printer because a function which has the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function where the error occurred, then check the displayed message, and take appropriate action.
What to do if my Ricoh Aficio MP 6002 All in One Printer says "Paper size of n is mismatched"?
The size of the paper in the tray of your Ricoh All in One Printer does not match the paper size specified in the printer driver. Select a tray containing paper that is the same size as the specified paper size.
What to do if my Ricoh Aficio MP 6002 All in One Printer says "Paper size and type are mismatched"?
This issue with your Ricoh All in One Printer can occur if the printer driver settings are incorrect or the tray does not contain paper of the size or type selected in the printer driver. Check that the printer driver settings are correct, and then load paper of the size selected in the printer driver into the input tray. You can also select the tray manually to continue printing, or cancel a print job.
Why are documents not printing from my Ricoh Aficio MP 6002?
If documents and reports are not printing from your Ricoh All in One Printer, it could be because the paper output tray is full. Remove the prints from the tray. Another reason could be that there is no paper left. Load paper into the printer.
General| Print Speed | 60 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Yes |
| Copy Speed | 60 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax | Yes |
| Paper Capacity | Standard: 4, 300 sheets; Maximum: 8, 300 sheets |
| Connectivity | USB 2.0, Ethernet 10/100Base-TX |
| Scan Resolution | 600 dpi |
| Zoom Range | 25% - 400% |
| Fax Transmission Speed | 3 seconds per page |
| Memory (RAM) | 1.5 GB |
| Power Source | 120V/60Hz |
| Operating System Compatibility | Windows, Mac, Linux |
| Scan Speed | Up to 80 ipm (B/W), Up to 80 ipm (Color) |
To Next Page
