Clearing Misfeeds
122
7
C Reinstall the punch waste box.
D Close the front cover of finisher.
“
Hole Punch Receptacle is full.” disappears.
Note
❒ If you do not reinstall the punch waste box in Step
C
, the “Hole Punch Re-
ceptacle is full.” message continues to be displayed.
❒ If the message is still displayed, reinstall the punch waste box.
3,000 Sheet-100 Sheet Staple Finisher
The following procedure describes how to remove punch wastes from the 3,000
Sheet-100 Sheet Staple Finisher.
A Open the front cover of finisher.
ADB034S
ANS019S
To Next Page
Loading...
Need help?
General
