Messages Displayed When Using the Copy/Document Server Function
19
2
Cannot staple pa-
per of this size.
The Staple function can-
not be used with paper
size selected.
Select a paper size that can be used in
Staple mode. See “Supplementary In-
formation”, Copy/Document Server
Reference.
Duplex is not
available with
this paper size.
A paper size not available
in Duplex mode has been
selected.
The following paper sizes are available
for Duplex mode: A3L, B4L, A4KL,
B5KL, A5KL, 11”×17”L,
11”×15”L, 11”×14”L, 10”×15”L,
10”×14”L, Legal (8
1
/
2
”×14”)L, Letter
(8
1
/
2
”×11”)KL, Half Letter
(5
1
/
2
”×8
1
/
2
”)KL, Executive
(7
1
/
4
”×10
1
/
2
”)L, F/GL (8”×13”)L,
Foolscap (8
1
/
2
”×13”)L, Folio
(8
1
/
4
”×13”)L, 8
1
/
4
”×14”L,
8”×10
1
/
2
”L, 8”×10”L, 8KL, 16KKL.
Select one of these sizes.
Maximum number of
sets is nn.
(A figure is placed at n.)
The number of copies ex-
ceeds the maximum copy
quantity.
You can change the maximum copy
quantity. See “Max. Copy Quantity”,
General Settings Guide.
File being stored
exceeded max.
number of pages
per file. Copying
will be stopped.
The scanned originals
have too many pages to
store as one document.
Press [Exit], and then store again with an
appropriate number of pages.
Magazine or Book-
let mode is not
available due to
mixed image mode.
You selected the Maga-
zine or Booklet function
for originals scanned us-
ing different functions,
such as copy and printer.
Make sure originals for the Magazine or
Booklet function are scanned using the
same function.
Orig. is being
scanned by anoth-
er function.
Please wait.
Document Server or
Scanner function is in
use.
To cancel the job in process, press [Exit],
and then press the {Document Server} or
{Scanner} key. Next, press the
{Clear/Stop} key. When the message
“
The Clear / Stop key was
pressed. Are you sure you
want to stop scanning?
” ap-
pears, press [Cancel].
You do not have
the privileges to
use this func-
tion.
This user code is not al-
lowed to use the function
selected.
Contact the administrator.
Message Cause Solution
To Next Page
Loading...
Need help?
General
