Troubleshooting When Using the Facsimile Function
36
3
Updating the des-
tination list...
Please wait.
Specified desti-
nation(s) or
sender's name has
been cleared.
The destination list is be-
ing updated from the net-
work using
SmartDeviceMonitor for
Admin or Web Image
Monitor. Depending on
the number of destina-
tions to be updated, there
may be some delay be-
fore you can resume op-
eration. Operation is not
possible while this mes-
sage is displayed.
Wait until the message disappears. Do
not switch off the power while this
message is displayed.
The selected
file(s) contained
file(s) without
access privileg-
es. Only file(s)
with access priv-
ileges will be
deleted.
You tried to delete a doc-
ument for which you do
not have permission to
delete.
Only the administrator can delete this
document. Contact the administrator if
you want to delete a document for
which you do not have permission to
delete.
Connection with
LDAP server has
failed. Check the
server status.
A network error has oc-
curred and connection
has failed.
Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Check the information of
[System Settings]. See “System Settings”,
General Settings Guide.
LDAP server au-
thentication has
failed. Check the
settings.
The user name or pass-
word does not match that
specified for LDAP serv-
er authentication.
Make settings correctly for the user
name and the password for LDAP serv-
er authentication.
Exceeded max. No.
of display search
results.
Max.:
The number of search re-
sults has exceeded the
maximum number of
items that can be dis-
played.
Search again after changing the search
conditions.
Exceeded time
limit for LDAP
server search.
Check the server
status.
A network error has oc-
curred and connection
has failed.
Try the operation once more. If the mes-
sage is still shown, the network may be
crowded. Check the information of
[System Settings]. See “System Settings”,
General Settings Guide.
Message Cause Solution
To Next Page
Loading...
Need help?
General
