Page 82 of 87
Table 42: List of Static Initialisation for Security Attributes of Common Access Control SFP
Object Security Attribute Default Value
User document Type of document When any of the following MFP
applications is used for storing user
documents: Copy Function, Printer
Function or Document Server Function,
the default value is "Document Server
user document".
When Scanner Function is used, it is
"scanner user document".
For Fax Data Storage Function, "fax
document".
For Fax Reception Function, "received
fax documents".
User document
(when the document type is
any of the following:
Document Server user
document, scanner user
document, or fax document)
Document user list Login user name of the normal user who
stored the user document
User document
(received fax document)
Document user list Login user name of the normal user who is
listed in the users for stored and received
documents
User job Login user name of normal
user
Login user name of the normal user who
newly created the user job
FMT_MSA.3(b) (Static attribute initialisation)
The TOE sets the default value to the available function list and the function type.
When newly creating a normal user, the value that allows any operations of the MFP applications is set to the
available function list for the user.
The setting value for the function type is determined for each MFP application. The value set for each
function is as follows:
- For Copy Function: the value that identifies the Copy Function.
- For Document Server Function: the value that identifies the Document Server Function.
- For Printer Function: the value that identifies the Printer Function.
- For Scanner Function: the value that identifies the Scanner Function.
- For Fax Function: the value that identifies the Fax Function.
FMT_MTD.1 (Management of TSF data)
The TOE allows only specified users to operate the information of the TSF (TSF data) from the specified
operation interfaces as shown in
Table 43.
Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.