Ricoh Aficio MP C3001 Series User Manual

Page 11 of 93
Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.
- Audit Function
- Identification and Authentication Function
- Document Access Control Function
- Use-of-Feature Restriction Function
- Network Protection Function
- Residual Data Overwrite Function
- Stored Data Protection Function
- Security Management Function
- Software Verification Function
- Fax Line Separation Function
1.4 TOE Description
This section describes Physical Boundary of TOE, Guidance Documents, Definition of Users, Logical
Boundary of TOE, and Protected Assets.
1.4.1 Physical Boundary of TOE
The physical boundary of the TOE is the MFP, which consists of the following hardware components
(shown in Figure 2): Operation Panel Unit, Engine Unit, Fax Unit, Controller Board, HDD, Ic Ctlr, Network
Unit, USB Port, SD Card Slot, and SD Card.

Ricoh Aficio MP C3001 Series Specifications

General

Type	Color Laser Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
First Print Time (Black)	7.8 seconds
First Print Time (Color)	10.8 seconds
Memory (Standard)	1 GB
Print Speed	30 pages per minute (ppm)
Copy Speed	30 copies per minute (cpm)
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL6, PostScript 3, PDF
Operating System Compatibility	Windows, Mac OS, Linux