Page 33 of 93
Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.
For those points mentioned above, the security problems and security objectives in this ST are consistent
with those in the PP.
2.4.3 Consistency Claim with Security Requirements in PP
The SFRs for this TOE consist of the Common Security Functional Requirements, 2600.1-PRT, 2600.1-SCN,
2600.1-CPY, 2600.1-FAX, 2600.1-DSR, and 2600.1-SMI.
The Common Security Functional Requirements are the indispensable SFR specified by the PP. 2600.1-PRT,
2600.1-SCN, 2600.1-CPY, 2600.1-FAX, 2600.1-DSR, and 2600.1-SMI are selected from the SFR Package
specified by the PP.
2600.1-NVS is not selected because this TOE does not have any non-volatile memory medium that is
detachable.
Although the security requirements of this ST were partly augmented and instantiated over the security
requirements of the PP, they are still consistent with the PP. Described below are the parts augmented and
instantiated with the reasons for their consistency with the PP.
Augmentation of FAU_STG.1, FAU_STG.4, FAU_SAR.1, and FAU_SAR.2
FAU_STG.1, FAU_STG.4, FAU_SAR.1, and FAU_SAR.2 are augmented according to PP APPLICATION
NOTE7 in order for the TOE to maintain and manage the audit logs.
Augmentation of FIA_AFL.1, FIA_UAU.7, and FIA_SOS.1
For the Basic Authentication function of the TOE, FIA_AFL.1, FIA_UAU.7, and FIA_SOS.1 are augmented
according to PP APPLICATION NOTE36.
Refinement of FIA_UAU.1(a), FIA_UAU.1(b), FIA_UID.1(a), FIA_UID.1(b), and FIA_SOS.1
For authentication of normal users of this TOE, Basic Authentication conducted by the TOE and
authentication conducted by the external authentication server can be used. According to PP APPLICATION
NOTE 35, the authentications of users are assumed to be executed by the TOE or external IT devices. For
this reason, both Basic Authentication and External Authentication comply with the PP. The refinement of
FIA_UAU.1(a), FIA_UAU.1(b), FIA_UID.1(a), FIA_UID.1(b), and FIA_SOS.1 is to identify these
authentication methods; it is not to change the security requirements specified by the PP.
Augmentation and Refinement of FIA_UAU.2 and FIA_UID.2
Since the identification and authentication method for RC Gate differs from the identification and
authentication methods for normal users or administrator, FIA_UAU.2 and FIA_UID.2 are augmented
according to PP APPLICATION NOTE 37 and PP APPLICATION NOTE 41, aside from FIA_UAU.1(a),
FIA_UAU.1(b), FIA_UID.1(a) and FIA_UID.1(b).
The refinement of FIA_UAU.2 and FIA_UID.2 is to identify the identification and authentication method for
normal users or administrator and the identification and authentication method for RC Gate; it is not to
change the security requirements specified by the PP.
To Next Page
Loading...
Need help?
General
