Reception
162
3
Note
❒ E-mail received via SMTP can also be routed to single or group destinations
programmed in the destination list.
❒ If an e-mail transfer request is received when the “SMTP RX File Delivery Set-
tings” is “Off” in the Facsimile Features menu, this machine responds with an
error message to the SMTP server.
❒ You can make settings that limit transfer to specified originators.
❒ Using this function, you can also send documents from your e-mail applica-
tion to e-mail addresses and G3 fax machines' destinations through this ma-
chine simultaneously.
❒ For the maximum number of destinations you can program in a group, see
“Maximum Values”.
Reference
p.278 “Maximum Values”
“Facsimile Features”, General Settings Guide
JBIG Reception
If you use JBIG (Joint Bi-level Image Experts Group) compression, you can send
photographic originals faster than with other methods of compression. It allows
you to receive documents sent in the JBIG format through JBIG Transmission.
Important
❒ This function is not available with Internet Fax function.
Auto Fax Reception Power-Up
This machine can be set to shut down automatically if no one has used it for a
while. In these situations, even though the operation switch is off, the machine
can still receive incoming documents as long as the main power switch is on.
Important
❒ Reception is not possible if both the operation switch and main power switch
are turned off.
Note
❒ You can set whether documents are printed as soon as they are received (Im-
mediate Reception) with the User Parameters (switch 14, bit 0) in the Facsim-
ile Features menu.
❒ You can also have fax documents received by Memory Reception (Substitute
Reception) printed after the machine is turned on.
Reference
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
