Ricoh Aficio MP C3500 Facsimile Reference

Printing Options
171
3
Just size printing
If you enable this function, received documents are printed on the sheet that has
the highest priority.
This function is enabled with User Parameters (switch 05, bit 5) in the Facsimile
Features menu.
If the paper tray is not stocked with paper of a suitable size to print a received
document, a message appears on the display prompting you to load paper of the
required size. When you have loaded new paper, press [Exit] to print the document.
Note
❒ After pressing [Exit], procedure varies depending on machine status when the
message occurred.
• If any received documents or reports were being printed automatically, the
printer automatically continues printing from where it left off.
• If any documents or reports were being printed manually, the printer does
not resume printing. Perform the operation from the beginning again.
Reference
“Facsimile Features”, General Settings Guide
Having incoming documents printed on paper from the bypass tray
You can print documents sent from Specified Senders on paper from the bypass
tray.
Set as follows:
• Program a special sender and select the Bypass Tray for the paper tray type.
• In “Program Special Sender” in the Facsimile Features menu, turn on the
“Special Reception Function” in “Initial Set Up”.

Ricoh Aficio MP C3500 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Speed (Color)	35 ppm
Copy Speed (Black)	35 cpm
Copy Speed (Color)	35 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	3 seconds per page
Max Paper Size	12" x 18"
Duplex Printing	Yes
Interface	Ethernet 10/100Base-TX, USB 2.0
Power Source	120V, 60Hz
Type	Multifunction
Zoom Range	25% - 400%
Scan Resolution	600 dpi
Scan Speed	50 ipm
Memory (Maximum)	1 GB
Hard Disk Drive	40 GB
PDL	PCL5c, PCL6, Adobe PostScript 3
Dimensions (W x D x H)	26.4" x 26.7" x 29.1"
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 1200 x 1200 dpi