Using the DeskTop Binder-SmartDeviceMonitor for Client Port
15
1
How to enable Recovery/Parallel Printing
If no settings on the [Recovery/Parallel Printing] tab are available, follow the procedure
below.
A Start DeskTop Binder-SmartDeviceMonitor for Client, and then right-click
the DeskTop Binder-SmartDeviceMonitor for Client icon on the taskbar.
B Click [Extended Features Settings], and then select the [Set Recovery/Parallel
Printing for each port] check box.
C Click [OK] to close the [Extended Features Settings] dialog box
To Next Page
Loading...
