Mac OS X
47
2
Using Bonjour (Rendezvous)
Follow the procedure below to print using Bonjour (Rendezvous) under Mac OS
X 10.2.3 or higher. Ethernet and wireless LAN connections can also be used.
A Start Printer Setup Utility.
B Click [Add].
• Mac OS X 10.4 or later
Click a printer that has “Bonjour” indicated in the “Connection” column.
If the zone is set, click [More Printers...], and then select the zone from the
second pop-up menu.
•Other Mac OS X
Click [Rendezvous] on the pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
C Select the name of the connected printer from the list of printer models, and
then click [Add].
Under Mac OS X 10.4 or later, Installable Options window appears. Select the
option you want to set up, and then select an appropriate setting for it, and
then [Continue].
D Quit Printer Setup Utility.
Note
❒ When printing with a Rendezvous connection to a Macintosh computer,
printer language does not change automatically. Use the control panel on this
printer to change printer language to [Auto Detect] or [PS] before printing.
Changing to EtherTalk
Follow the procedure below to configure a Mac OS X to use EtherTalk.
Important
❒ You need an administrator name and a password (phrase). For details, consult
your network administrator
A Open [System Preference], and then click the Network icon.
B Click [Built-in Ethernet] in the [Show:] list box.
C Click the [AppleTalk] tab.
D Select the [Make AppleTalk Active] check box.
E
To change AppleTalk zones, select a name from the
[
AppleTalk Zone:
]
pop-up menu.
F When the settings are made, click [Apple Now].
Reference
For information about installing applications required for EtherTalk, see
the Mac OS manuals.
To Next Page
Loading...
