Using PostScript 3
74
3
User Code
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users
and allows you to check the number of sheets printed under each code with
SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Reference
For details about using SmartDeviceMonitor for Admin, see Help.
Paper Selection
All Pages and Destination Tabs
Use this to select the media type and input tray.
Important
❒ This function is for Windows 95 / 98 / Me only.
Reference
For details about the [All Pages] and [Destination] tabs. See the printer driver's
Help.
Windows 95 / 98 / Me [User Code] on the [Statistics] tab.
Windows 2000 / XP,
Windows Server 2003
[User ID:] on the [Job Log] tab in the Printing Preferences dia-
log box.
Windows NT 4.0 [User ID:] on the [Job Log] tab in the Document Defaults dialog
box.
Mac OS Select the [Enable User Code] check box, and then enter a user
code in the [User Code:] box on [Job Log] in the print dialog box.
Mac OS X Select the [Enable User Code] check box, and then enter a user
code in the [User Code:] box on [Job Log] in the print dialog box.
To Next Page
Loading...
