Ricoh Aficio SP 100 - Error Messages and Codes

65
R
i
c
o
h
C
o
.
L
t
d
.
h
t
t
p
:
/
/
w
w
w
.
r
i
c
o
h
.
c
o
m/
Error Messages & Codes
 Error notification depends on the model.
 The three models have different operation panels with different
display capability.
 Error status can be checked on all three models using the Smart
Organizing Monitor.
 Refer to the Error Notification Matrix below.
 The notes section has additional information.
 See the FSM for tables of error codes and error messages.
 FSM Æ Troubleshooting Æ SC Tables
 FSM Æ Troubleshooting Æ Error Messages
YesNoNoLCD
NoYesNoSeven-segment Display
YesNoNoBuzzer
YesYesYesIndicator LEDs
YesYesYesSmart Organizing Monitor
M103M102M101Error Notification Method
- Error Notification Matrix -
When an Error Occurs
 The machines have different operation panels and components so this affects
how each machine alerts the operator when a problem occurs.
 When an error occurs, the alert indicator on the operation panel lights and the
machine stops.
 A buzzer will sound an alert on the M103. Press any key on the operation panel
to turn the buzzer off. (This is the fax speaker on the M103 that also functions as
an error alarm.)
 There is no buzzer alert for the M101 or M102 because these machines do not
have the fax speaker. The SC number can be displayed on the Service Mode
screen of the Smart Organizing Monitor.
 The M101 has no panel display. When an error occurs only the alert lamp lights.
 The M102 has a 2-segment display. A letter-number code is used to designate
an SC code. For example, "C6" designates "SC101". (These 2-digit codes are
included in the SC tables in the FSM.)
 The M103 has a 7-segment display so the full SC number, "SC101" can be
shown on the operation panel display.
 For all models of this series, the M101, M102, and M103, the Smart Organizing
Monitor can be used to display the most recent SC codes on the Service Mode
screen.