7
Using the Copier Function
The following is the initial screen in copier mode.
1. Reproduction ratio
2. Status of the machine
3. Copy quality
4. Paper size
5. Copy quantity
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
Press the [Copy] key.
Place the original face down on the exposure glass or face up
in the ADF.
Lift the ADF carefully without holding the input tray. Otherwise, the ADF
might be damaged.
Exposure Glass ADF
BSP086S
BSP412S
• If necessary, configure advanced photocopy settings. For more details, see "Advanced Photo-
copy Settings" on page 9.
BAA350S
BSP043S
Initial Screen and Basic Operation
To Next Page
Loading...
