• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error is cleared.
When "Misfd: BypssTray" Appears
"Misfd: BypssTray" appears when a paper jam has occurred in the bypass tray.
Use the following procedure to remove paper that has become jammed after being fed in from the
bypass tray.
1. If paper is jammed in the bypass tray input area, remove the jammed paper carefully.
2. Close the bypass tray.
3. Push the side button to open the front cover, and then carefully lower it.
To Next Page
Loading...
