Ricoh Aficio SP 3500N - Using the Printer Again after It Has Been Inactive for a Long Period

3. Pull the opening lever on the front cover, and then carefully lower the front cover.
CMC096
1
2
4. Lower the levers with thumb fingers.
CMC079
5. Close the front cover with both hands carefully.
CMC098
• This step is not necessary if the printer's power switch is on but the printer has been inactive for a
long time.
Using the Printer Again after it has been Inactive for a Long Period
Use the following procedure to start using the printer again after it has been inactive for a long period.
10. Appendix
132