Upgrading an x86 driver installed as an "Additional Driver" on an x64
system (and vice versa)
To replace an x86 print driver on an x64 server (and vice versa), the
following should be done:
Step 1 Open the Devices and Printers folder.
Step 2 Select any print queue and open the Print Server Properties window.
Step 3 Select the "Drivers" tab.
Step 4 Remove the x86 PCL/PS Printer driver files.
Step 5 Select "Remove driver only" and click OK.
Step 6 Click "Add" to install the new version of the x86 PCL/PS Printer driver.
8 Uninstalling the Ricoh PCL6/PS Universal Print Driver
Ricoh recommends using the latest version of the Universal Print Driver, which
can be found at :
http://ricoh-
usa.com/services_and_solutions/universalprintdriver/universal_print_driver.aspx
12
To Next Page
Loading...
