• The energy saving functions will not operate in the following cases:
• During communication with external equipment
• When the hard disk is active
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the printer's covers are opened
• When the "No toner. Replace Toner Cartridge." message appears
• When toner is being replenished
• When the [User Tools] screen is displayed
• When fixed warm-up is in progress
• When data is being processed
• When operations are suspended during printing
• When the Data In indicator is on or blinking
• When the sample print, locked print, hold print, or stored print screen is displayed
• When the screen of a document that was stored appears
• The printer consumes less energy when in Sleep mode, but it takes longer to start printing.
• If two or more energy saving functions are set, the function for which the predetermined conditions
to enter energy saving mode are met takes effect first.
Turning On/Off the Power
27
To Next Page
Loading...
Need help?
General