3. Troubleshooting
This chapter provides solutions to common problems and it also explains how to correct unwanted print
results.
When Indicators Are Displayed
This section describes the indicators that appear when the printer requires user attention such as
removing misfed paper, reloading paper, or performing other procedures.
Indicator Status
: Paper Misfeed indicator Appears when a paper misfeed occurs.
For details about removing jammed paper, see p.112
"Removing Jammed Paper".
: Load Paper indicator Appears when paper runs out.
For details about loading paper, see p.46 "Loading Paper".
: Add Toner indicator Appears when toner runs out.
For details about adding toner, see p.121 "Adding Toner".
: Add Staple indicator Appears when staples run out.
For details about adding staples, see p.125 "Adding
Staples".
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
For details about removing punch waste, see p.120
"Removing Punch Waste".
: Service Call indicator Appears when the printer is malfunctioning or requires
maintenance.
: Open Cover indicator Appears when one or more covers of the printer are open.
69
To Next Page
Loading...
Need help?
General