Message Cause Solution
"Unauthorized Copy
Prevention error occurred.
Job cancelled."
The [Enter User Text:] field
on the [Unauthorized Copy
Prevention for Pattern
Details] screen is blank.
PCL 6/PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Effects] in
"Menu:". Select [Unauthorized
Copy Prevention], and then click
[Details] to display [Unauthorized
Copy Prevention for Pattern
Details]. Enter text in [Enter User
Text:].
"Unauthorized Copy
Prevention error occurred.
Job cancelled."
The resolution is set to a
value less than 600 dpi
when [Unauthorized Copy
Prevention] is specified.
On the printer driver, set the resolution
to 600 dpi or higher, or deselect
[Unauthorized Copy Prevention].
"User Paper Type Error" The printer does not
recognize the paper type
specified using the printer
driver.
Check that the printer is connected to
the network correctly and bidirectional
communication is enabled. If the
problem persists, confirm the user
paper type settings of the printer. For
details, see "Registering Unique Names
to Paper Types", Operating Instructions.
"You do not have a privilege
to use this function. This job
has been cancelled."
The entered Login User
Name or Login Password is
not correct.
Check that the Login User Name and
Login Password are correct.
"You do not have a privilege
to use this function. This job
has been cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see Security Guide.
"You do not have a privilege
to use this function. This
operation has been
cancelled."
The logged in user does not
have the privileges to
register programs or change
the paper tray settings.
For details about how to set
permissions, see Security Guide.
3. Troubleshooting
94
To Next Page
Loading...
Need help?
General