Ricoh AficioSP C410DN - Page 171

Print Settings Menu
159
5
❖ Font Source
You can set the location of the default font.
•Resident
•RAM
•HDD
•SD
• SD Font Download
Note
❒ Default: Resident
❒ When you select [RAM], you can select only fonts downloaded to the
printer RAM.
❒ When you select [HDD], you can select only fonts downloaded to the op-
tional hard disk.
❒ When you select [SD], you can select only fonts for downloaded to the
SD card.
❒ When you select [SD Font Download], you can select only fonts for down-
loaded to the SD card without the optional hard disk.
❖ Font Number
You can specify the ID of the default font you want to use.
• 0 to 63 (Internal)
• 1 to 63 (Download)
❖ Point Size
You can specify the point size you want to use for the default font between
4 and 999.75 in 0.25 increments.
Note
❒ Default: 12.00 points
❒ This setting is effective only for a variable-space font.
❖ Font Pitch
You can specify the number of characters per inch you want to use for the
default font between 0.44 and 99.99 in 0.01 increments.
Note
❒ Default: 10.00 pitch
❒ This setting is effective only for fixed-space fonts.