Ricoh AficioSP C410DN - Printer Configuration

Getting Printer Information over the Network
237
6
Printer configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer
language.
• UNIX: Use the “info” command and “rsh”, “rcp”, “ftp” and “sftp” parame-
ters.
• mshell: Use the “info” command.
❖ Input Tray
❖ Output Tray
❖ Emulation
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell “info” commands, see p.210 “info”.
Item Description
No. ID number of the paper tray
Name Name of the paper tray
PaperSize Size of paper loaded in the paper tray
status Current status of the paper tray
•Normal:Normal
• NoInputTray: No tray
• PaperEnd:No paper
Item Description
No. ID number of the output tray
Name Name of the output tray
status Current status of the output tray
•Normal:Normal
• PaperExist:Paper exist
• OverFlow:Paper is full
• Error:Other errors
Item Description
No. ID number of the printer language used by the
printer
Name Name of the printer language used in the
printer
Version Version of the printer language