Ricoh AP610N - Aficio B/W Laser Printer - Selecting the Display Language

Selecting the Display Language
27
2
Selecting the Display Language
Select a language using the procedure
described here.
The message for the selected lan-
guage will appear on the display. If
you want to use the display in Eng-
lish, the following procedures are un-
necessary.
Note
❒ The default setting is English.
A Press the {Menu} key.
The [Menu] screen appears on the
display.
B Press the {U} or {T} key to dis-
play [Language].
C Press the {# Enter} key.
The following message appears on
the display:
D Press the {U} or {T} key until the
language you want to select ap-
pears.
E Press the {# Enter} key. Wait for
two seconds.
The [Menu] screen appears on the
display.
F Press the {Online} key.
The initial screen appears.
Menu:
Language
AGN503S
Language:
*English
Ready
AGN504S
AGN505S
KirP4GB_Setup-F6_FM_forPaper.book Page 27 Thursday, May 12, 2005 11:28 AM