23
Quick Guide
Setting the date and time
When the power is turned on for the first time and the language
setting is completed, the date/time setting screen appears.
1. Press the !"
!"!"
!"#$
#$#$
#$ buttons to set
the year, month, date and time.
Change the value with !" and move
the frame with #$.
2. In [FORMAT], choose the Date and
Time format.
Select the format with !".
3. Check the display on the bottom of
the screen and then press the O
OO
O
button.
The date is set.
Note
If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again. Any other changes you made with the Setup mode and
Shooting setup menu will also be reset.
Reference
• For how to correct the date and time, see P.106.
• For how to put a date stamp on each frame, see P.72.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
