Ricoh D146 - Page 730

Main SP Tables-1
System Maintenance Section 2-11 D146/D147/D148/D149/D150
SP Mode Tables
028
12 x 18_SEF/SRA3_SEF Threshold
*ENG
[0.000 to 3.300
/ 0.000 /
0.001V/step]
Adjoining paper width threshold with side fence position sensor of one action
bypass tray.
029
Switch Env Youchou 3 LEF/Env Youkei 4 LEF *ENG
[0 or 1 / 0 /
1/step]
0: OFF
1: ON
Adjoining paper width threshold with side fence position sensor of one action
bypass tray.
030
Switch LT SEF/LG SEF *ENG
[0 or 1 / 0 /
1/step]
0: OFF
1: ON
Adjoining paper width threshold with side fence position sensor of one action
bypass tray.
031
Switch C5 LEF/SRA4 *ENG
[0 or 1 / 0 /
1/step]
0: OFF
1: ON
Adjoining paper width threshold with side fence position sensor of one action
bypass tray.
032
Main Scan Size Adj ENG
[0 or 1 / 0 /
1/step]
Fine tunes side fence position sensor of one action bypass tray.
033
Main Scan Size Adj Result (0:Fail 1:Succeed) ENG
[0 or 1 / 0 /
1/step]
Displays result of fine tuning side fence position sensor of one action bypass tray.
034 Paper Press Amt Adj Value *ENG
[-1.6 to 3.0 /
0.0 /
0.1mm/step]