Ricoh D146 - Page 844

Main SP Tables-1
System Maintenance Section 2-125 D146/D147/D148/D149/D150
SP Mode Tables
1313
[Paper Thikness Detect]
-
001 ON/OFF ENG
[0 or 1 / 1 / 0]
0: OFF
1: ON
1801
[Relay Motor Speed Adjust]
Setting for resolution of paper thickness sensor. (* No need to change)
001
Feed CCW:Plain:Low *ENG [-2.0 to 2.0 / 0.9 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflects adjusted value as they are. All:
73mm/s, 1200dpi mode
002
Feed CCW:Plain:Std *ENG [-2.0 to 2.0 / 0.9 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
003
Feed CCW:Mid-thick:Std *ENG [-2.0 to 2.0 / 1.1 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
004
Feed CCW:Thick 1:Low *ENG [-2.0 to 2.0 / 1.2 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 73mm/s, Metis-C1b: 73mm/s
005
Feed CCW:Thick 1:Mid *ENG [-2.0 to 2.0 / 1.2 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflect adjusted value as they are Metis-C1c:
108mm/s, Metis-C1d: 108mm/s, Metis-C1e: 108mm/s