4. Select the required SP setting with the numeric keys in accordance with the
following tables, then press the "Enter" key.
NOTE: If you input the wrong SP setting by mistake, you can cancel it by
pressing the "Clear/Stop" key before pressing the "Enter" key.
Paper size SP settings for the paper tray unit
SP Settings A4 Version LT Version
0— —
1 A3 (lengthwise) 11" X 17"
2 B4 (lengthwise) 8
1/2" X 14"
3 A4 (sideways) 11" X 8
1/2"
4 A4 (lengthwise) 8
1/2" X 11"
5 B5 (sideways) —
6 B5 (lengthwise) F (8" x 13"/lengthwise)
7—F4 (8
1/2" x 13"/lengthwise)
8 F (8" x 13"/lengthwise) Folio (8
1/4" x 13"/lengthwise)
9F4 (8
1/2" x 13"/lengthwise) 11" X 15"
10 Folio (8
1/4" x 13/ lengthwise) 10" X 14"
11 11" x 8
1/2" 8" X 101/2"
12 8
1/2" x 11" 8" X 10"
13 8K (267 mm x 390 mm/lengthwise) A4 (sideways)
14 16K (267 mm x 195 mm/sideways) A4 (lengthwise)
15 16K (195 mm x 267 mm/lengthwise) —
Paper size SP settings for by-pass feed
(See Detailed Descriptions, section 11.9.3)
SP Settings A4 Version LT Version
0 Paper size detected in accordance
with the side fence position
Paper size detected in accordance
with the side fence position
1 A4 (lengthwise) 8
1/2" x 11"
2 A4 (sideways) B5 (lengthwise)
3 A5 (lengthwise) A6 (lengthwise)
4 A5 (sideways) F (8" x 13"/lengthwise)
5 A3 (lengthwise) F4 (8
1/2" x 13"/lengthwise)
6 Folio (8
1/4" x 13"/lengthwise) Folio (81/4" x 13"/lengthwise)
7 — 10" x 14"
8 — 8K (267 mm x 390 mm/lengthwise)
9 — 16K (267 mm x 195 mm/sideways)
10 — 16K (195 mm x 267 mm/lengthwise)
Paper size SP settings for the LCT
SP Settings A4 Version LT Version
0— —
1 11" x 8
1/2" 11" x 81/2"
2 A4 (sideways) A4 (sideways)
5. Leave SP mode by pressing the "Clear Modes" key three times.
Rev. 7/95
FSM 4-49 FT5535/4527/4522
To Next Page
Loading...
