2.7.2 Special Paper Size Selection for the 1st Tray
For the 1st tray, a wider range of paper sizes can be selected using SP5-019-007
for A153, A156, A157, and A160 copiers, or SP5-019-008 for A155 and A159
copiers.
NOTE: The definition of the 1st tray differs with the type of copier. See
"Installation - Paper Feed Station Definition".
If a special paper size is selected, the machine ignores the paper size set with
the paper size slider.
Select the special paper size in accordance with the following table.
SP5-019-007 (A153, A156, A157, and
A160 copiers)
SP5-019-008 (A155 and A159 copiers)
A4/LT Version
0 Paper size detected by the paper size slider
1 A3 (lengthwise)
2 297 mm x 432 mm (maximum size)
3 B4 (lengthwise)
4 A4 (sideways)
5 A4 (lengthwise)
6 B5 (sideways)
7 B5 (lengthwise)
8 A5 (sideways)
9 B6 (sideways)
10 200 mm x 148 mm
11 210 mm x 170 mm
12 210 mm x 340 mm
13 11" x 17"
14 8
1/2" x 14"
15 11" x 8
1/2"
16 8
1/2" x 11"
17 8
1/2" x 51/2"
18 F (8" x 13"/lengthwise)
19 F4 (8
1/2" x 13"/lengthwise)
20 Folio (8
1/4" x 13"/lengthwise)
21 11" x 15"
22 10" x 14"
23 8" x 10
1/2"
24 8" x 10"
25 225 mm x 276 mm
26 250 mm x 300 mm
27 8K (267 mm x 390 mm/lengthwise)
28 16K (267 mm x 195 mm/sideways)
29 16K (195 mm x 267 mm/lengthwise)
FT5535/4527/4522 4-50 FSM
To Next Page
Loading...
