NOTE: (1) Keep the shipping retainers after installing the machine. They will be
reused if the machine will be transported to an another location in the
future.
(2) Proper reinstallation of the shipping retainers is required in order to
avoid any transport damage.
(3) A sorter adapter (A568) is required to install this sorter stapler in the
A157/A159/A160/A161/A162 copiers. Before installing this sorter
stapler, please install the sorter adapter in the copier.
!
CAUTION
Unplug the copier power cord before starting the following procedure.
1. Remove the strips of tape and the shipping retainers [A].
2. Open the front door [B] and remove the strips of tape from the staple unit and
close the front door.
[A]
[B]
FSM 10-9 FT5535/4527/4522
To Next Page