Mode No. Function
5-802-xxx Free Run Mode
5-803 Input Check Mode †
5-804 Output Check Mode
°5-810 SC Reset †
5-811 Used in Japan only. Do not change the factory setting.
°5-812 Telephone Number Input † (A156 copier only)
°5-816 Used in Japan only. Do not change the factory setting.
5-817 Used in Japan only. Do not change the factory setting.
°5-905 APS A4/LT Sideways Priority †
•
°5-906 Manual Staple Reset Time Setting †
•
°5-907 Cover Mode Selection †
•
°5-908 Image Shift/Erase Selection †
•
°5-909 10 key Zoom/Size Magnification †
°5-910 Guidance Language Setting (A156 copier only) †
Peripherals
•
°6-001 SADF Auto Reset Time Setting †
•
°6-002 ADF Free Size Setting †
°6-003 Auto Sort Selection †
°6-005 Blank Copy for Last Odd Originals in Duplex †
6-006-xxx DF Registration Adjustment †
6-009 DF Free Run with Paper
•
°6-010 Auto APS Select (DF) †
•
°6-011 Thick/Thin Original Mode Selection †
°6-101 Sorter Installation †
°6-102 Sorter Stack Limit †
°6-104 Staple Sheet Limit †
6-107 Sorter Free Run Mode
Counters
°7-001 Total Operation Time Display †
°7-002 Total Original Counter Display †
°7-003 Copy Charge Counter for RDS/CSS Display †
This is for use with features that are available only in Japan. However,
it does show how many originals have been copied (total of DF mode +
platen mode).
°7-004 Initial Copy Counter Setting for RDS/CSS Display †
This is for use with features that are available only in Japan. However,
it does show the total number of copies that have been made.
°7-101-xxx Total Copies by Paper Size †
°7-203 Drum Counter †
°7-204-xxx Feed Unit Counter †
°7-205 DF Counter †
FSM 4-17 FT5535/4527/4522
To Next Page