Ricoh FT5535 - Page 84

Mode No. Function Settings
°5-905 APS A4/LT
Sideways
Priority †
Specifies whether the machine selects LT
sideways paper if the original is A4.
If "ON" is selected, LT sideways copy paper is
selected automatically when the APS sensors
detect an A4 sideways original. This feature
does not work in reverse (A4 sideways paper
is not selected for an LT sideways original).
0: OFF
1: ON
•
°5-906 Manual Staple
Reset Time
Setting †
Sets the manual staple reset time.
(1 second per step [Range: 1 to 999])
1 ~ 999
Default = 20 s
After the end of a copy job in sort mode,
manual staple mode is reset automatically
when the manual staple reset time has passed.
•
°5-907 Cover Mode
Selection †
Use to select whether to have a front cover or
both front and back covers added to copies in
cover mode.
Copy paper for the cover pages should be
placed on the by-pass feed table.
1: Front/Back
2: Front
•
°5-908 Image
Shift/Erase
Selection †
Selects whether to have an image shift mode
or an image erase mode.
1: Erase mode
2: Shift mode
•
°5-909 10 key
Zoom/Size
Magnification †
Selects whether to have a 10 key zoom
function or a size magnification function.
1: Size
magnification
2: 10 key zoom
function
°5-910 Guidance
Language
Setting †
(A156 copier
only)
Selects the language used on the operation
panel display (except for SP mode guidance).
1: English
2: French
3: German
4: Italian
5: Spanish
6: Swedish
7: Portuguese
8: Danish
9: Norwegian
10: Finnish
11: Dutch
•
°5-911 Copy Mode Copy mode selected when machine is turned
on.
1: Duplex copy
mode (default)
2: Single side
copy mode
•
°6-001 SADF Auto
Reset Time
Setting †
Sets the auto reset time for SADF mode.
(1 second per step [range: 1 to 99 seconds])
1 ~ 99
Default = 5
⇒
Rev. 1/26/96
FSM 4-33 FT5535/4527/4522