Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when cleaning
finishes.
● When using the bypass tray, make sure the envelope or sheet of paper is between the top and bottom of the bypass tray guides.
● Paper can only be inserted one sheet at a time.
● Support the sheet with your hands to keep it from sliding out and dropping.
● Insert the sheet straight into the bypass tray.
● Opening from an Application
● Canceling Printing
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0012.htm (2 of 3)2005/10/05 12:05:13
To Next Page
Loading...
