Ricoh J006 - Restoring the Settings to Their Defaults

Printer Driver > Maintaining the Printer Using Utilities > Restore Defaults/Other Settings > Restoring the Settings to Their Defaults
Restoring the Settings to Their Defaults
Follow the procedure below to restore the settings for [Adjust Print-head Positions], [Registration], [Adjust Paper
Feed], and [I/O Timeout:] to their defaults.
Open the printer properties dialog box.
Click the [Maintenance] tab.
Click [Restore Defaults/Other Settings].
Click [Restore Defaults]
A confirmation message appears.
Click [OK].
● The settings currently made for [Adjust Print-head Positions], [Registration], [Adjust Paper Feed], and [I/O Timeout:] will be lost. These
settings cannot be restored.
● Opening from the Start Menu
● Opening from an Application
● Adjust Print-head Positions
● Registration
● Adjust Paper Feed
● Specifying an I/O Timeout
Top Previous Next
Copyright © 2005 All rights reserved.
Restoring the Settings to Their Defaults
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0090.htm2005/10/05 12:04:25
Contents Previous Next Settings