Printer Driver > Maintaining the Printer Using Utilities > Registration
Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking the test
pattern printed.
● To check the printed test pattern, proceed to step .
Open the printer properties dialog box.
Click the [Maintenance] tab.
Click [Registration].
In the [Unit type:] list, select a paper tray. In the [Paper type:] list, select a paper type.
Click [Next >].
Check that A4/Letter size paper is loaded in the paper tray.
Click [Next >].
A test pattern to adjust the print start position is printed.
● Do not perform other operations during printing.
Check the optimal adjustment values on the printed test pattern.
● Fold the test pattern sheet in half lengthwise.
● The optimal adjustment value is the difference between the single vertical line and the cross's vertical line that you can see when the
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/m0003.htm (1 of 2)2005/10/05 12:04:21
To Next Page
Loading...
