Troubleshooting > Printer Status Monitor Errors > Printer Error
Printer Error
An error has occurred in the printer. Turn the power off once, and then turn it back on.
● If the printer is relocated from a cold area to a warm area or the printer is placed in a room where the temperature varies greatly,
condensation may form inside the printer causing errors. If this happens, an error might not clear if the power is turned off and then on. Wait
until the printer acclimates and the condensation disappears. This should take about one hour.
● If the error still does not clear after the printer acclimates to room temperature and the power is turned back on, contact your sales or service
representative.
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0024.htm2005/10/05 12:05:27
To Next Page
Loading...
