8. Insert a sheet of paper into the bypass tray with the print side face up.
Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when
cleaning finishes.
❍ When using the bypass tray, make sure sheet of paper is between the top and bottom of the bypass tray guides.
❍ Paper can only be inserted one sheet at a time.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0005.htm (2 of 3)2005/10/05 12:06:14
To Next Page
Loading...
