5. Push tray 1 gently in until it stops.
6. Lower the output tray.
7. Slide the envelope selector to the rear position
.
8. Open the printer properties dialog box from the application.
9. On the [Setup] tab, click [Envelope] in the [Paper type:] list.
10. Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
11. Make print settings, and then click [OK].
● Opening from an Application
● Paper Handling Precautions
● Printable Area
● To print in reverse orientation in the printer driver settings, select the [Rotate by 180 degrees] check box on the [Page Settings] tab.
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0009.htm (3 of 3)2005/10/05 12:06:19
To Next Page
Loading...
