Printer Driver > Maintaining the Printer Using Utilities > Nozzle Check
Nozzle Check
Follow the procedure below to check whether the print-head nozzles are clogged up or not by printing a nozzle check
test pattern.
● To check the printed test pattern, proceed to step 7..
1. Open the printer properties dialog box.
2. Click the [Maintenance] tab.
3. Click [Nozzle Check].
4. Click [Next >].
5. Check that A4/Letter size paper is loaded in the paper tray.
6. Click [Next >].
7. Check the printed test pattern.
Normal
When print-heads are clogged
8. Click [Finish].
❍ If the printed test pattern is not clear, select the [Clean Print-heads (Normal)] check box, and then click [Next >].
● Opening from the Start Menu
● Opening from an Application
● Clean Print-heads (Normal)
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/m0001.htm (1 of 2)2005/10/05 12:07:41
To Next Page
Loading...
